 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PL IA Features Servo mount Shaft support by front and rear precision ball bearings Non-standard features and specifications available Gangable up to 10 cups Model 6534 is currently available, although not recommended for new designs. Model 6538 is preferred. *R oH S CO M NT 6534 - 7/8 " (22 mm) Precision Potentiometer Electrical Characteristics1 Standard Resistance Range....................................................................................1 K to 100 K ohms Total Resistance Tolerance .........................................................................................................10 % Independent Linearity ................................................................................................................0.5 % Effective Electrical Angle .......................................................................................................320 3 End Voltage....................................................0.1 % maximum (0.25 at 2 K ohms, 0.4 % at 1 K ohm) Output Smoothness .....................................................................................................................0.1 % Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level .............................................................................................................750 VAC minimum Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever is Less) +70 C......................................................................................................................................1 watt +125 C....................................................................................................................................0 watt Insulation Resistance (500 VDC)..................................................................1,000 megohms minimum Resolution ................................................................................................................Essentially infinite Product Dimensions 5.08 MIN. (.200) 3.170 + .000/- .008 DIA. (.1248+.0000/-.0003) .25 X 45 10 (.010) CHAMFER 19.050 +.000/ - .013 (.75+.0000/-.0005) 1.57 (.062) 1.45 MIN. (.057) 12.70 .79 (1/2 1/32) 5.08 FOR EACH ADDITIONAL CUP. (.200) 30 3 3 120 MAX. 2 30 3 22.23 (.875) DIA. Environmental Characteristics1 Operating Temperature Range...................................................................................+1 C to +125 C Storage Temperature Range.....................................................................................-65 C to +125 C Temperature Coefficient Over Storage Temperature Range ...........................500 ppm/C maximum Vibration .........................................................................................................................................15 G Wiper Bounce ...........................................................................................0.1 millisecond maximum Total Resistance Shift ..............................................................................................2 % maximum Shock .............................................................................................................................................50 G Wiper Bounce ...........................................................................................0.1 millisecond maximum Rotational Life (No Load) .........................................................................25,000,000 shaft revolutions Total Resistance Shift ............................................................................................10 % maximum Moisture Resistance (MIL-STD-202, Method 103, Condition B) Total Resistance Shift ............................................................................................10 % maximum IP Rating ........................................................................................................................................IP 40 12.07 (.475) 1.57 (.062) ADD 1 Mechanical Characteristics1 Mechanical Angle ................................................................................................................Continuous Torque (Starting & Running) ............................................................0.18 N-cm (0.25 oz.-in.) maximum Shaft Runout................................................................................................0.025 mm (0.001 in.) T.I.R. Lateral Runout ...............................................................................................0.05 mm (0.002 in.) T.I.R. Shaft End Play ...............................................................................................0.08 mm (0.003 in.) T.I.R. Shaft Radial Play ...........................................................................................0.08 mm (0.003 in.) T.I.R. Pilot Diameter Runout .................................................................................0.025 mm (0.001 in.) T.I.R. Backlash ........................................................................................................................0.1 maximum Weight .....................................................................................................................................18 grams Terminals................................................................................................................Side exit turret style Soldering Condition....................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 wire diameter. Maximum temperature 399 C (750 F) for 3 seconds. No wash process to be used with no clean flux. Marking ................................Manufacturer's name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code. Ganging....................................................................................................................10 cups maximum 1 15.24 MAX. (.600) TOLERANCES: EXCEPT WHERE NOTED .51 .13 DECIMALS: .XX .XXX (.02), (.005) FRACTIONS: 1/64 MM DIMENSIONS: (IN.) 2 CCW WIPER At room ambient: +25 C nominal and 50 % relative humidity nominal, except as noted. 1 CLOCKWISE 3 CW Recommended Part Numbers Part Number* 6534S-1-102 6534S-1-202 6534S-1-502 6534S-1-103 6534S-1-203 6534S-1-503 6534S-1-104 Resistance () 1,000 2,000 5,000 10,000 20,000 50,000 100,000 REV. 06/06 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. |
Price & Availability of 6534S-1-103
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |